Fiberlock RECON ULTRA Smoke Odor Sealer

Fiberlock RECON ULTRA Smoke Odor Sealer is the pinnacle of smoke odor elimination. This advanced smoke odor eliminator leaves no room for lingering odors. Seal in freshness and enjoy a smoke-free environment with RECON ULTRA.

Available in 1 gal, 4 gal, and 5 gal

SDS

PDS

Features

• Finish grade, solvent free
• Blocks tough stains
• Moisture permeable
• Tintable
• Eliminates malodors on multiple surfaces
• Blocks pet and trauma scene odors
• Easily accepts topcoat

SURFACE PREPARATION

Prior to applying Fiberlock’s ULTRA RECON Smoke and Odor Sealer it is critical that the substrate be thoroughly cleaned. Smoke odor encapsulation is a final step that needs to be part of a comprehensive smoke/odor management protocol.  This protocol should include the following steps: odor cleaning, odor neutralization and odor encapsulation. Fiberlock recommends cleaning with RECON Heavy Duty Cleaner or Extreme Duty Cleaner, followed by the application of RECON Extreme Duty Odor Counteractant. After the substrate is clean, dry and sound, apply ULTRA RECON Smoke Odor Sealer to encapsulate any residual odors that remain.

APPLICATION TOOLS

Apply ULTRA RECON Smoke Odor Sealer with a brush, roller or airless spray equipment.

• Brush: Synthetic, nylon or polyester bristle
• Roller: 3/8” nap synthetic fiber
• Spray Settings: Pressure: 2000-3000 P.S.I. Tips: .015 to .021 tips

PRODUCT APPLICATION

Apply ULTRA RECON Smoke Odor Sealer generously and uniformly by brush, airless spray or roller. Apply one coat of ULTRA RECON Smoke Odor Sealer and ensure that the finished surface is properly sealed. Two-coats may be required on some porous or heavily stained surfaces. Topcoat floor applications when foot traffic or heavy storage is expected. ULTRA RECON Smoke Odor Sealer is tintable up to 2 oz. of universal liquid colorant per gallon. Can be directly applied to wallboard, sheetrock, wood, masonry and concrete. Ferrous metals may require a DTM primer to prevent flash rusting.

COVERAGE

• Smooth Surfaces: 200-400 ft²/gal.
• Porous Surfaces: 100-200 ft²/gal.

DRYING TIME

• @ 70°F 50% R.H.
• To Touch: 30 Min.
• Recoat: 2 Hours
• Topcoat: 2 Hours